When gluing the tone bars and bracings, use go bars under a go deck so the pressure is displaced evenly across each piece. Use a cut straw to clean up any excess Tight bond glue after appling the go bars.
Subscribe to:
Post Comments (Atom)
skip to main |
skip to sidebar
About
- Honda 'Ukuleles
- I plan to document the development of my craftsmanship and skill as a luthier.
Blog Archive
-
▼
2010
(24)
-
▼
May
(15)
- 'Ukulele complete
- Shape nut, shape saddle, and string up the uke
- Gluing the bridge
- Finishing with Tru-oil - Do not rush this process.
- Sound hole and fret board
- Trimming the soundboard and back
- Gluing the back
- Tentalones
- attaching sides
- Week 6 - Attaching the sides to the soundboard.
- Headstock veneer
- Tone bars and bracings
- Week 1 - Sound hole Inlays
- Week 1 - Back and soundboard
- Week 1 - Design, template, and materials
-
▼
May
(15)
No comments:
Post a Comment