Tuesday, May 11, 2010


When gluing the top and bottom tentalones around the sides use small sections and make sure they are clamped tight around the curves.

Sand the edges of the tentalones so the are flexible. It will break in some spots but thats ok, as long as you can clamp them to the sides, it will help support your sides to your soundboard and backboard.
Add a spare piece of wood to make the sides level with the base of the neck. Sand the inside before attaching the back to the side. Once the back in glued on, the 'ukulele is in a "boxed" "white" stage, and the only access to sand the inside will be through the soundhole.

No comments:

Post a Comment